Paradise Sheds
In Hawai'i, residential and agricultural structures are classified as Dwellings or Accessory Buildings. On this site you will find Accessory Buildings that can be used for several uses, including carports, pavilions, sheds, studios, workshops, garages, and barns.
Most structures will require a permit. Your building package includes detailed plans. At the time the drawings were prepared, every effort has been made to comply with all Hawaiian building codes. Interpretation of the codes vary from area to area so to be sure to be in compliance, we advise that you visit your local planning and building departments and explain the use of the structure, its size (floor area and height) and location on your property with reference to property lines and all other structures.
Paradise Sheds provide complete project support form the initial planning to final installation. We will help you choose the right building kit to meet your specific needs. Provide phone and email support during set up and answer questions regarding codes, recommended installation practices and safe building methods.
The design of your accessory building is critical to a successful outcome. The climactic conditions of Hawai'i vary widely. We offer assistance selecting the right structure and features to meet your conditions. If you do not see the exact product that meets your needs, contact us. We might have an unpublished plan or one that is in development that will work for you.
Hawaiian Craftsman Tiny House
Size: 10 x 18 studio with Lanai (190 square feet)
Height floor to peak: 15’-8”
Side Wall height: 8 ft.
- 2 foot roof overhang
- Double Strap Foundation blocks
- Split Pitch Dutch Hip roof style with Gable dormer over stair and shed dormer over rear sleeping loft
- Open eaves
- Rafter Tails plumb cut with facia
- Composition shingle roofing, Painted Galvalume metal roof available
- 2” holes provide venting at eaves, choice of ridge vent or gable vents
- Covered Lanai and entry stairs (reclaimed wood used in photos, package comes with new wood)
- Entry door provided includes operable window
- Includes low-e windows
- 2 x 6 floor joist
- Tongue and groove plywood floor
- Double wall construction, 2x4 wall studs, 16” o.c.
- 2x4 trusses 32” o.c.
- 2x4 flat purlins screwed to trusses with 3” screws
- Hurricane and Earthquake strapping 4’ o.c. load path, foundation block to roof
Package includes:
- Pre-cut roof components for easy installation
- Pre-cut ladder
Specifications:
- All Material to be Hi-Bor pressure treated #2 or better spruce/pine/fir
Foundation:
- Double Strap Pier blocks
- Galvanized termite pans
- 4x6 Foundation Beams
- 2x6 floor joists 16” o.c.
- 3/4” thick tongue and groove sub floor
Wall Framing:
- 2x4 sill with sill seal under
- Double 2x4 top plate
- 2x4 precut wall studs 16” o.c, single stud in corners
- Double 2x6 headers
- Simpson hurricane straps 48” o.c.
Roof Framing:
- 30” (2’-6”) Roof Overhang
- 2x4 trusses @ 24” o.c.
- 2x4 pressure blocks with 2” diameter vent holes screened with perforated vinyl
- Simpson hurricane straps 48” o.c.
Siding and Trim:
- 5/8” thick T-1-11 siding
- 1x3 pine trim at corners, windows and doors
- 2” select fascia
- Exposed eaves
- Eave ventilation: 2” vents
Roof Sheathing:
- 3/4” cdx roof sheathing
Roofing:
- IKO Lifetime laminated asphalt composition shingle
- Continuous ridge Vent or custom wooden louvers
Doors:
- Flush Insulated steel door bored for lockset and deadbolt
- 1 3/4” thick
- Prehinge with weather-stripping and threshold
- Economy grade lockset with deadbolt
Windows:
- White vinyl
- Sliding unless otherwise noted
- Double Pane
- Low E glass
Onsite work excluded and to be performed by licensed contractor.
Bali Studio with Porch
Installation Budget: $1,380.00
Installation Budget is based on current construction costs in the Hilo, Puna and Volcano areas. Costs outside of these areas are typically 20% higher. It is required that building pads of compacted base course are 10ft. larger than building. Vehicle access also required.
Size: 10 x 12
- Height floor to peak: 9’-8”
- Side Wall height: 8’
- Two Oversized 4” x 8” Foundation Beams set on 10” diameter concrete piers.
- Tapered floor joists
- Tongue and groove plywood floor.
- 2” x 4” wall and roof frame 2’ o.c.
- Split Pitch Dickey Roof
- Ventilation: vented pressure blocks and custom wooden gable louvers.
- Includes entry door and three windows
- Lifetime Warranty Composition roof over ¾” plywood
- 6’ x 6’ wooden deck
Onsite work excluded and to be performed by licensed contractor.
Japanese Garden Studio
This Japanese Garden Studio comes in a variety of sizes. All have 8 ft. high side walls with a curved gable roof. The foundation is a block and base style with three 4x6 beams set on termite blocks. The floor sets approximately 18” above the ground. The package includes simple stairs with two steps. The walls can be either frame ready for drywall or framed with 4x4s every 4 ft. for a single wall look. The ceiling inside follows the roof pitch so the inside height at the peak ranges from 9’-6” for the 8ft. wide to 11’-6” for he 12 ft. wide. The entry door is an economy grade metal door with wooden jamb that includes a lockset and deadbolt. A circular accent plaque is provided. The Japanese Garden Studio comes with a standard studio comes with a window box with small accent roof. Two additional 36’x36’ standard windows are included. You can adjust the window size and count to meet your needs. You pay only the difference in the cost of the windows and the cost of larger window headers if wider windows are selected. Exterior accents include hardi lap siding on gables, circular gable vents and vertical battens at 4 ft. centers. Floor plan and elevation drawings are prepared for each studio.
Specifications:
- Beams: Three 4x6 foundations beams/skid
- Foundation block: 4" x 7"x 7" termite blocks over 2" x 12" x 12" concrete blocks
- Termite protection: Termite pans. All material hibor treated
- Foundation posts: 4"x 4" posts required to set floor level.
- Floor frame: 2x6, 24" o.c.
- Sub floor: 5/8" CDX tongue and groove plywood
- Wall Frame: 2x4 2’ o.c studs, single bottom plate and double top plate
- Roof Frame: 2 x 6 trusses spaced 4 ft.
- Facia: plumb cut tails without facia.
- Eave: 24” open eaves
- Siding: 5/8" T-1-11 no grooves
- Trim: 1x3 treated pine 48" o.c. battens
- Gables: hardi lap siding
- Roof Deck: 2x4 at 24” centers
- Roofing: 26 ga. Kynar metal roofing available in red or light green
- Door: Flush metal door with lockset, wooden jamb.
- Windows: Three 36" x 36" sliding vinyl windows.
- Add 6 x 10 loft: $320.00
- Fasteners: 3 1/4" Hot dipped galvanized nails for all framing assembly, 2 1/2" Hot dipped galvanized ring shank nails for all plywood assembly.
Purchase order assumes forklift access to a clear site within one foot of level, includes set up and leveling excludes site work, painting, electrical, plumbing and interior finishes. Hand clearing of brush or excavation work not included in this purchase order.
Prices including delivery and set up East Hawaii.
10 x 12 Complete Package Shed
Installation Budget: $1,298
Installation Budget is based on current construction costs in the Hilo, Puna and Volcano areas. Costs outside of these areas are typically 20% higher. It is required that building pads of compacted base course are 10ft. larger than building. Vehicle access also required.
Size: 10 x 12
The Basic Storage Building Package is a sturdy, custom designed building with economy in mind. This line of building has been value engineered to give you the most area for your money. The side walls are typically 6 ft. high so these buildings are scaled in proportion to their small footprint.
Uses:
- Lawn equipment storage
- Household storage
- Pantry
- With modifications this shed can be used for
- Art and Hobby Studio
- Office
- Document storage
- (This structure is not intended for use as a habitable dwelling, detached bedroom, ohana or guest cottage. Please visit our sister company Ohana Cottages for assistance with Tiny and Small Housing.)
Dimensions:
- 10 ft Wide x 12 ft Long
- 6 ft. Side Walls, 11' Building Height from ground.
- 4 on 12 pitch roof
- 12" roof overhangs.
- Interior Ceiling: Vaulted Ceiling
Foundation:
- This Shed foundation consists of two 4x6 beams / runners set on 4" termite blocks over 4" thick concrete foundation blocks. This type of foundation is perfect for storage. It is affordable and low to the ground. The Beams allow for the building to be easily moved with tractor and chain or by hand with pipes and planks.
Floor system:
- The floor frame consists of 2x6 joists on 24" centers. The decking used in this shed is 5/8" thick exterior glued treated plywood.
Wall and Roof Frame:
- The walls of this shed are framed with 2 x 4s on 24" centers with a single top and bottom plate. The roof is framed with 2x4 trusses on 24" centers. Roof frame is decked with ½" cdx plywood.
Exterior Finishes:
- The Walls are sided with 5/8" thick T-1-11 Siding with 8" o.c. grooves. All trim is 1x4 treated pine. The roofing is 20 year rated fiberglass composition Asphalt Shingle. Ventilation is provided by two 8" x 16" aluminum gable vents.
Windows and Doors:
- One 36" wide x 80" steal door. Includes one 3X3 window.
Package includes:
- Foundation, exterior walls, roofing framing, wall and roof sheathing, exterior windows and doors, and roofing.
Estimate excludes:
- Site assembly, electrical or plumbing, interior finishes, exterior paint or stain, floor covering, permitting fees.
Warranty:
- Material and labor is guaranteed to be free of defect for a period of one year from the date of delivery. Owner will be provided all information pertaining to extended material warranties.
Onsite work excluded and to be performed by licensed contractor.
|
Building Package Includes:
Detailed plans showing Floor Plan, Foundation Plan, Foundation Frame Plan, Roof Frame Plan, Roof Plan, Four Elevations, Section, and Details. Detailed Material showing component, quantity, material description, spacing and required attachment hardware. All Lumber, Building Material, Hardware, and Fasteners required to complete the building project to the shell stage. ( The shell stage is when the structure is dried in, framing, siding, windows and doors, exterior trim, and roofing.) Packages that include pre-cut components are noted as such. |
Building Package Excludes:
Any on site work such as grading/site work, package set up, installation or construction. Any electrical or plumbing components or work. Any paint or interior finishes not specifically listed. All lumber unless specifically noted is pressure treated, #2 grade or better. |